Available in two types and six sizes, the Rising Kerb is deigned to withstanding axle weight of 3 tonnes (type A – 2 metres and 2.5 metres) and 12 tonnes (type B 2.5 metres, 3 metres and 3.9 metres and 4.9 metres).
Manufactured from a welded rectangular hollow section frame and durbar top plate, the Rising Kerb features a hydraulic power pack to raise and lower the unit smoothly.
A state of the art programmable logic controller co-ordinates the hydraulics, access control and traffic light signalling system. During power failure an emergency lowering facility is fitted as standard.
A variety of access control options are available including proximity card, radio, token, keypad and intercom. These combined with induction loop or photocell safety and close facilities ensure the Rising Kerb open and close smoothly on each activation.
|Construction||Frame - Steel Rectangular hollow section
Top Plate - Durber
|Span(s)||See schematic in product details PDF|
|Dimensions||See schematic in product details PDF|
|Drive Unit||Hydraulic Power Pack|
|Operating Supply||400v 3Ph + neutral + earth 50 Hz - 10 amps
230v 1Ph 50Hz - 16 amps
|Operating Speed||Type A - 3.0 seconds
Type B - 6.0 seconds
|Power||Type A - 1.5 Kw
Type B - 1.5 Kw
|Standard Opening||Type A - 350mm Lift
Type B - 600mm Lift
|Manual Operation||Emergency lower included as standard|
|Finish||Galvanised + Paint (yellow / black)|
|Control Options||Card, Radio, Token, Keypad, Intercom, Push Button, Vehicle Transpondent, Induction, Loop and Photocell|
|Safety Features||Induction Loop and Photocell - Both available on request|
|Accessories||Two(2) pairs - Red / Green traffic lights included as standard|
|Approved Standards||C.E. BS6671 Pt4|
For schematic diagrams for this product, please download the product PDF.