A robust and heavy duty design, the Type 1 sliding gate delivers high performance levels time after time. It is available in two styles, cantilever for spans up to 9,5 metres (single leaf) or 19 metres (double leaf) and tracked up to 15 metres (single leaf) or 30 metres (double leaf).
The frame and guide roller stanchions are manufactured from rectangular hollow section with several infills available ( such as palisade, tube or mesh) to suit site requirements. From its high quality and well proven motor and gearbox drive unit, the gate responds quickly to operator instructions. The double roller assembly located at the top and bottom of the gates ensures maximum rolling efficiency when opening and closing.
Smooth, reliable and easy to use the gate can be controlled by a wide range of access control systems including proximity card, push buttons, keypad, token and radio control. These combined with induction loop or photocell safety close facilities, makes this gate the one to choose on high risk and security conscious sites.
Other standard features include a manual operation override facility in case of power failure and safety edge system, to prevent the gate closing on pedestrians or vehicles.
|Construction||Frame - Steel, Rectangular hollow section Infill - Tube, Mesh, Palisade, Bar|
|Span(s)||Cantilever - 9500mm max
Tracked - 15000mm max
|Dimensions||See schematics in Product Details PDF|
|Drive Unit||Motor and Gearbox / Chain Rack|
|Operating Supply||230v 1Ph 50Hz - 16 amps|
|Included as Standard|
|Finish||Standard - 3 x Coat paint treatment
Optional - Galvanised / Zinc coated
|Control Options||Card, Radio, Token, Keypad, Intercom, Push Button, Vehicle Transponder, Induction Loop and Photocell|
|Safety Features||Standard - 3(no) - Safety Edges
Optional - Induction Loop or Photocell
|Accessories||Fire Alarm Activation, Barbed Wire, Rotor Spikes, Audible Alarm, Flashing Beacon, Access Reader Posts|
For schematic diagrams for this product, please download the product PDF.