Type 3 Electric Sliding Gate
The Type 3 Electric Sliding Gate delivers high performance time after time in the most demanding environments. The gate can span openings of 6 metres (single leaf) or up to 12 metres (double leaf) in a cantilever construction.
The frame and stanchions are manufactured using rectangular hollow section and a variety of infil options are available. From its high quality motor and gearbox drive unit and PCB control the gate responds quickly to operator instructions.
The gates can be opened by a wide range of access control systems such as proximity card, push button, keypad or radio control. These combined with induction loop or photocell safety and close facilities make them simple and reliable to operate.
Standard features include a manual operating override facility in case of power failure and a safety edge system, preventing the gate closing on pedestrians or vehicles.
Gate cappings/barbed wire gate tops, fire alarm activation and audible alarms are available as optional extras.
Specification
| Construction | Frame - Steel, Rectangular hollow section Infill - Tube, Mesh, Palisade, Bar |
| Span(s) | Cantilever - 6000mm max Tracked - Not Available |
| Dimensions | See schematic in Product Details PDF |
| Drive Unit | Motor and Gearbox / Drive Rack |
| Operating Supply | 230v 1Ph 50Hz - 6 amps |
| Operating Speed | 150mm/sec |
| Power | 1 Kw |
| Standard Opening |
As Span |
| Manual Operation |
Included as Standard |
| Finish | Standard - 3 x Coat paint treatment Optional - Galvanised / Zinc coated |
| Control Options | Card, Radio, Token, Keypad, Intercom, Push Button, Vehicle Transponder, Induction Loop and Photocell |
| Safety Features | Standard - 3(no) - Safety Edges Optional - Induction Loop or Photocell |
| Accessories | Fire Alarm Activation, Barbed Wire, Rotor Spikes, Audible Alarm, Flashing Beacon, Access Reader Posts |
| Approved Standards |
C.E. |
Schematics
For schematic diagrams for this product, please download the product PDF.